拉齐奥队员名单

產品中心

服務熱線:


開封市泛太測控科技有限公司    

Kaifeng Fantai Measurement and Control Technology Co.,Ltd

地址:中國·河南省開封市祥符區經開區王解莊南路中


0371-23212206           

郵   箱:[email protected]

Oversea sales:in[email protected]meter.com

網   址:www.oaft.net



 

 

 

Turbine flowmeter

時間:2019-01-14人氣:

Good quality Fantai wafer turbine flowmeter from Fantai

03(1).jpg

 Turbine flowmeter introduction

.jpg

 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff mounted on the flow meter body.

Good quality Fantai Wafer Turbine Flowmeter Charactor

0110.jpg

  • Easy install,simple structure.
  • High resolution and fast response time; 5 to 50 sec
  • Wide temperature range; -4 ~ 230 °F (-20 ~ 110 °C)
  • Easily cleaned; designed to flush particulates through the meter with the fluid media
  • Factory calibrated by Gravimetric method
    Battery-powered display available
  • RS-485 and HART communicaitons available
  • Use stainless steel to improve durability and minimize maintenance for you.
0136.jpg

Good quality Fantai wafer turbine flowmeter parameters

 

Fluid Condition Pure fluid
volecity minimum 0.4-0.5m/s
Sensor material SS304 SS316 available
Turn down 1:20
Ambient temperatture

-20℃~+60

fluid temperature -20℃~+120℃
output pulse,4-20mA
communication RS485, HART
power supply 24VDC (two lines), 12~24VDC(three lines).  battery support.
Ingress protection IP65
Accuracy  0.2%R,0.5%R,1%R

 

 

Good quality Fantai wafer turbine flowmeter flow range data:

 

DN Flow range(m3/h) Pressure(Mpa)
0.2%R 0.5%R 1%R
15mm 1.2-4 0.6-6 0.4-6 1.6-6.3
20mm 2-6 0.8-8 0.6-8
25mm 3-10 1.2-12 1.2-12
32mm 4-12 1.5-15 1-20
40mm 8-25 3-30 3-30
50mm 12-40 5-50 5-50 1.6-2.5

 

 

Good quality Fantai wafer turbine flowmeter manufacturing flowchart

 

Pipe cutting ——>lathe processing ——>Polishing——>Rotor assemble——>Transmitter assemble ——> Flowmeter calibration ——>Qualified products

 

 014.JPG

Calibration is the most important parts of manufacturing the high accuracy flowmeter,As the principle is the same,the material and the structure design of the flowmeter is not much different.High accuracy flowmeters depends on the high accuracy calibration equipment.

 

Good quality Fantai wafer turbine flowmeter advantages in details

 

010.jpg

  • We use the reference flowmeter method to confirm the sensor condition,then after assemble,we will use the gravimetric systems to confirm the sensor and the transmitter condition.The calibration device included the high accuracy Sartorius scale.
  • we use the 8 or 12 blades for better accuracy.
  • We use the label to remind customer where to connect the power and voltage in case the unmatched voltage damage the flowmeter.
  • The big screen LCD display the forward gross volume,flow volume and unit clearly.

                                                

 

 

Related products

 

017.jpg

 

 Turbine flowmeter manufacturing company information

 

 02(2).jpg

 

 

 Our Good quality Fantai wafer turbine flowmeter Certificate

 4(1).jpg

 Our Electromagnetic flowmeter service

 

  • On time delivery
  • Scheduled producing managementt
  • Export products has priority to domestic order on product quality and lead time
  • Good products focus more on the Aftersale service and Consult service,
  • Good Package
  • Good installation guide service 

QQ20181204152101.jpg

 FAQ of Turbine flowmeter 

 

1.How do you calibrate the flowmeter?

We use the reference standard flowmeter method to calibrate the 0.5%R flowmeters.We use the Gravimetric for the 0.2% R flowmeters.

 

2.How can you gurantee the high accuracy?

The Gravimetric mothod is much more accurate than the volumetric calibration and we use the high accuracy sidorious scale to gurantee the less tolerance.

 

3.How many years do you use the calibration ?

we use it since our factory starts at 2008.

 

4.Why is the calibration very important?

The material and the structure of the magnetic flowmeter are not much difference,and the accuracy depends what it reference.Our high accuracy Sartorius scale can reach the 0.016%.so it is no problem to gurantee the 0.2% accuracy. 

 

5.Do you need agent?

Yes,we need agent to expand our sales,we provide technical support,Products priority and good price.

 

6.I am a small company,Can I be your agent?
We are a developing company ,we Appreciate partners who is willing to grow with us

 

You minght be a common customer to a large scaled company or famous brand,but for us ,you are the most important and we will put you to the first.

 

 Send enquiry for more info about Electromagnetic flowmeter 

 

We gurantee that the quality of the oversea sales products are much better than domestic model.

 

Please place an trial order to  try our service  and you will like it !!

 

We can accept the order with trade assurance on Alibaba to protect your quality,shipment,and payment.

 

01(4).jpg

                                 

 01(5).jpg

聯系人:張先生   電 話:0371-23212206    手 機:18937886625  

地 址: 中國·河南省開封市祥符區經開區王解莊南路中段

  版權所有   技術支持:大華偉業廣告有限公司  網站地圖

拉齐奥队员名单 1617赛季欧冠全部赛况 黑龙江时时中奖设 黑龙江时时0 大乐透追加4加0 3d通杀一码50期不错 极速赛车开奖网站 全国各地彩票开奖结果 单机捕鱼下载大全 乐乐彩票是不是真的 老时时大小单双 广东时时号码推荐 login彩乐国际